MISCOM7212G Series Industrial Ethernet Switch
- 5 -
LED indication lights
LED
indication
lights
P1 P2
ALAM
RUN
G9 - G12
RED on
GREEN
off
GREEN
blink
GREEN
blink
GREEN
on
GREEN blink
Power
OK
No alarm
Alarm
System
OK
Fiber link
is active
Data
transmitting
LED indication lights for ports
RJ45
SFP
YELLOW
GREEN
GREEN
on
off
on
blink
off
on
blink
off
High
rate
No
connected
or low rate
connected
active
No
connect connected active
No
connect
Gigabit fiber SFP interfaces
This product has two full-duplex 1000Base-LX single mode / multimode
fiber interface, the port number for the G1 and G2, using hot-swappable SFP
during the optical interface using LC connectors. Optical interface to be used in
pairs (TX and RX as a pair), TX mouth to light the originator, the remote switch
connected to another optical interface of the light receiving end RX; RX ports
for the light receiving end, to connect with a remote switch with an optical
interface light originator TX. The use of two redundant 1000Base-LX optical
interface fiber optic redundant ring network can be formed in the system failure
redundant ring switching time less than 20ms, can effectively improve network
reliability.
SFP optical module shown in the figure :
Power input terminals
Use this product as standard 2-channel DC redundant power supply.
Connect with 5.08mm pitch terminal block 2-way power input.
Full load power: 15W.