User Manual
19
When option Compass in the menu is highlighted, pressing button M will hide the menu and bring
up the battery status icon as shown below. Pressing button M again will hide the battery status
icon.
Note:
y
When the battery charge is going to use up and the battery status icon is displayed on
the live image, the icon will flicker to warn the battery needs to be replaced.
y
When the battery charge is going to use up and the menu is displayed on the live image,
a smaller battery charge icon will flick at the right corner above the menu to warn the
battery needs to be replaced.
y
After the icon flickers for some time, the camera will switch off automatically
Battery Charging
y
Insert the battery into the battery charger. This is done by aligning the end surface of the
battery pack to the edge of the terminal shutter of this unit, then fitting and sliding the battery
packing in the direction of the arrow.
y
Connect the charger to its AC adapter and then connect the adapter to a wall outlet or socket.
y
The battery charger will utter an audible sound to indicate charging start and the battery level
symbol will flash in its LCD screen. Besides the battery level symbol, its LCD screen also
shows the battery capacity by ** Hr ** Min. The capacity will increases as charging goes on.
While charging, the charge lamps on the top of the battery pack will light in turn, indicating
charging is going on.
y
When normal charge is completed, the charger will give an audible sound, display a prompt
Full & the battery capacity in its LCD screen and stop the battery level symbol from flashing.
The charge lamps on the top of the battery pack also go out.
y
Remove the battery pack when required. It can be used even if the charging is not completed.
y
Once the battery is fully charged it can be used with the camera.
