wtw pHotoFlex, Operating Manual

Page: 29 / 111

pHotoFlex / pHotoFlex Turb Operation
29 ba75491e05 04/2009
z
Messages
Information or instructions are marked by the
i
symbol. They can-
not be selected.
Example:
Note
The principles of navigation are explained in the two following sections
by reference of examples:
z
Setting the language (section 4.3.3)
z
Setting the date and time (section 4.3.4).
4.3.3 Navigation example 1: Setting the language
Note
The following example describes in the language of the country how to
set the language. On delivery, English is set as the language in the
pHotoFlex (Turb). During initial commissioning, the language is set in
the menu, Configuration / System / Language.
1 In the measured value display:
Open the Configuration menu with <MENU>.
The instrument is in the configuration mode.
2 Select the System menu with <
▲
> <
▼
>.
The current selection is displayed in reverse video.
3 Open the System menu with <START/ENTER>.
i
Buffer recognition TEC
i
Immerse sensor in buffer 1
Set temperature: 25 °C
Continue
pH & ORP
The
i
symbol indicates
info texts, e.g.
messages, notes or instruc-
tions
Language
:
Deutsch
Store
Display
Reset
Interface
Continue ...
System