wtw pH 7310, Operating Manual

Page: 52 / 72

Transmitting data (USB interface) pH 7310
52
ba75929e02 10/2011
9 Transmitting data (USB interface)
9.1 Options for data transmission
Via the USB interface you can transmit data to a PC. The following table shows
which data are transmitted to the interface in which way:
Data Control Operation / description
Current
measured val-
ues of all con-
nected
sensors
Manual  With <F2> / [USB output] .
 Simultaneously with every manual
storage process (see section 8.1
M
ANUAL STORAGE
, page 46).
Automatic, at
intervals  With <F2__> / [USB output] .
Then you can set the transmission
interval.
 Simultaneously with every auto-
matic storage process (see section
8.2 A
UTOMATIC STORAGE AT INTER
-
VALS
, page 47).
Stored mea-
sured values Manual  Displayed dataset with <F2> [USB
output] after calling up from the
storage.
 All datasets with the Output to USB
function.
(see section 8.3.1 E
DITING THE
MEASURED VALUE STORAGE
, page
49).
Calibration
records Manual  Calibration record with <F2> / [USB
output]
(see section 5.2.6 C
ALIBRATION
DATA
, page 32).
Automatic  At the end of a calibration proce-
dure.
The following rule applies: With the exception of the menus, shortly
pressing the
<F2> [USB output] key generally outputs the display
contents to the interface (displayed measured values, measure-
ment datasets, calibration records).