pH 3310 IDS
Operation
ba77035e01
02/2014
21
Therefore, check the time at regular intervals.
Setting the date,
time and date format
The date format can be switched from the display of day, month, year
(
dd.mm.yy
) to the display of month, day, year (
mm/dd/yy
or
mm.dd.yy
).
The date and time are reset to default after a fall of the supply volt-
age (empty batteries).
1.
In the measured value display:
Using
<ENTER_>
, open the
Storage & config
menu.
The instrument is in the setting mode.
2.
Select and confirm the
System
/
Clock function
menu with
<
><
>
and
<ENTER>
.
The setting menu for the date and time opens up.
3.
Select and confirm the
Time
menu with
<
><
>
and
<ENTER>
.
The hours are highlighted.
4.
Change and confirm the setting with
<
><
>
and
<ENTER>
.
The minutes are highlighted.
5.
Change and confirm the setting with
<
><
>
and
<ENTER>
.
The seconds are highlighted.
6.
Change and confirm the setting with
<
><
>
and
<ENTER>
.
The time is set.
7.
If necessary, set the
Date
and
Date format
. The setting is made similarly
to that of the time.
8.
To make further settings, switch to the next higher menu level with
Back
<F1>
.
or
Switch to the measured value display with
<M>
.
The instrument is in the measuring mode.
Date format:
dd.mm.yy
Date:
01.02.14
Time:
14:53:40
Clock function
01.02.2014
08:00
Back
Summary of Contents for pH 3310 IDS
Page 6: ...Contents pH 3310 IDS 6 ba77035e01 02 2014 ...
Page 70: ...Index pH 3310 IDS 70 ba77035e01 02 2014 ...
Page 71: ......
