wtw Oxi 3315, Operating Manual

Page: 35 / 60

Oxi 3315 Settings
ba75944e02 03/2012
35
6.2.2 Data storage
This menu contains all functions to display, edit and erase stored measured
values.
6.2.3 Automatic Stability control
The automatic
Stability control
(AutoRead) function continuously checks the
stability of the measurement signal. The stability has a considerable impact on
the reproducibility of measured values.
You can activate or switch off the automatic
Stability control
function (see
section 6.2 S
ENSOR
-
INDEPENDENT SETTINGS
, page 34).
The measured parameter flashes on the display
 as soon as the measured value is outside the stability range
 when the automatic
Stability control
is switched off.
System
/
Interface
/
Baud rate
1200, 2400,
4800 , 9600,
19200
Baud rate of the USB Device interface
System
/
Interface
/
Output format
ASCII
CSV
Output format for data transmission
For details, see section 8 T
RANSMITTING DATA
(USB
INTERFACES
), page 44
System
/
Interface
/
Deci-
mal separator
Dot (xx.x)
Comma (xx,x)
Decimal separator
System
/
Interface
/
Out-
put header
Output of a header for
Output format
:
CSV
System
/
Clock function Date format
Datum
Time
Settings of time and date.
For details, see section 4.4.5 E
XAMPLE
2
ON NAVIGA
-
TION
: S
ETTING THE DATE AND TIME
, page 22
System
/
Service informa-
tion
Hardware version and software version of the meter
are displayed.
System
/
Reset
- Resets the system settings to the default values.
For details, see section 6.3.2 R
ESETTING THE SYS
-
TEM SETTINGS
, page 37
Menu item Possible setting Description
Detailed information on the memory functions of the Oxi 3315 are
given in section 7 D
ATA STORAGE
, page 38.