Oxi 3310 IDS (Oxi 3315)
Settings
ba75944e02
10/2014
35
6.2.2
Data storage
This menu contains all functions to display, edit and erase stored measured
values.
6.2.3 Automatic
Stability control
The automatic
Stability control
(AutoRead) function continuously checks the
stability of the measurement signal. The stability has a considerable impact on
the reproducibility of measured values.
You can activate or switch off the automatic
Stability control
function (see
The measured parameter flashes on the display
as soon as the measured value is outside the stability range
when the automatic
Stability control
is switched off.
System
/
General
/
Stabil-
ity control
on
off
Switches on or off the automatic stability control
during measurement (see section 6.2.3 A
System
/
Interface
/
Baud
rate
1200, 2400,
4800
, 9600,
19200
Baud rate of the USB Device interface
System
/
Interface
/
Out-
put format
ASCII
CSV
Output format for data transmission
For details, see section 8 T
System
/
Interface
/
Decimal separator
Dot (xx.x)
Comma (xx,x)
Decimal separator
System
/
Interface
/
Out-
put header
Output of a header for
Output format
:
CSV
System
/
Clock function
Date format
Datum
Time
Settings of time and date.
For details, see section 4.4.5 E
System
/
Service informa-
tion
Hardware version and software version of the meter
are displayed.
System
/
Reset
-
Resets the system settings to the default values.
For details, see section 6.3.2 R
Menu item
Possible setting
Explanation
Detailed information on the memory functions of the Oxi 3310 IDS
(Oxi 3315) are given in section 7 D
