Multi 9420
Transmitting data
ba75964e04
04/2015
107
11 Transmitting data
11.1 Outputting current measurement data
11.2 Transmitting data
The meter has the following interfaces:
USB-B interface (
USB Device
)
e.g. to connect a PC
USB-A interface (
USB Host
),
e.g. to connect a USB flash drive/USB printer
Via the USB-B interface (
USB Device
) you can transmit data to a PC or printer
and update the meter software.
Via the USB-A interface (
USB Host
) it is possible to transfer data to an external
USB memory device/USB printer.
11.3 Connecting the PC / USB-B interface
(
USB Device
)
Connect the Multi 9420 to the PC via the USB-B interface.
Installation of the
USB driver on the
PC
System requirements of the PC for installation of the USB driver:
PC with at least one free USB connection and CD-ROM drive
Windows 2000, Windows XP, Windows Vista or Windows 7.
1.
Output the current measurement data to an interface with
<PRT>
.
USB-B: e.g.: PC
USB-A: e.g.: printer or USB flash drive
(if no PC is connected)
1.
Insert the supplied installation CD in the CD drive of your PC.
2.
Install the driver from the CD.
Follow the Windows installation instructions as necessary.
3.
Connect the Multi 9420 to the PC via the USB-B interface.
The meter is listed as a virtual COM interface among the connections in
the Windows instrument manager.
