wtw Multi 9310, Operating Manual

Page: 82 / 102

Transmitting data (USB interfaces) Multi 9310
82
ba75937e03 12/2011
11.4 Options for data transmission to a PC
Via the USB-B interface you can transmit data to a PC. The following table
shows which data are transmitted to the interface in which way:
11.5 MultiLab Importer
With the aid of the MultiLab Importer software, you can record and evaluate
measuring data with a PC.
Data Control Operation / description
Current
measured val-
ues of all con-
nected
sensors manual z With <F2> / [USB output] .
z Simultaneously with every manual
storage process (see section 10.1
M
ANUAL DATA STORAGE
, page 75).
automatic, at
intervals z With <F2__> / [USB output] .
Then you can set the transmission
interval.
z Simultaneously with every auto-
matic storage process (see section
10.2 A
UTOMATIC DATA STORAGE AT
INTERVALS
, page 76).
Stored mea-
sured values manual z Displayed dataset with <F2> [USB
output] after calling up from the data
storage.
z All datasets with the Output to
RS232/USB function.
(see section 10.3.1 E
DITING THE
MEASURED VALUE DATA STORAGE
,
page 78).
Calibration
records manual z Calibration record with <F2> / [USB
output] (see section 5.2.6 C
ALIBRA
-
TION DATA
, page 38; section 7.3.6
C
ALIBRATION DATA
, page 54; section
8.3.4 C
ALIBRATION DATA
, page 60).
automatic z At the end of a calibration proce-
dure.
The following rule applies: With the exception of the menus, shortly
pressing the
<F2> / [USB output] key generally outputs the display
contents to the interface (displayed measured values, measuring
datasets, calibration records).
More detailed information can be found in the MultiLab Importer
operating manual.