Operation
Multi 350i
74
4.8.5
Displaying and outputting calibration records
You can display the calibration data
!
of one selected sensor, or
!
of all sensors connected
and then output them to the interface.
Displaying the calibra-
tion record of a selected
sensor
The calibration record of the last calibration can be found under the
Cal-
ibration
/
Calibration record
menu item in the respective measuring
menu. To open the settings, activate the relevant measuring window in
the measured value display and press the
<MENU/ENTER>
key
shortly.
Displaying the calibra-
tion records of all
sensors connected
The calibration records of the last calibration can be found under the
Data storage
/
Calibration data storage
menu item in the system menu.
To open the system menu in the measured value display, press the
<MENU/ENTER>
key for approx. 1 s.
Menu item
Setting/
function
Description
Data storage
/
Cali-
bration data storage
/
Display
-
Displays in pages all cali-
bration records of all sen-
sors.
Further options:
!
Scroll through the cali-
bration records with
<
▲
> <
▼
>
.
!
Output the displayed
calibration record to the
interface with
<PRT>
.
!
Quit the display with
<ESC>
or
<MENU/ENTER>
.
!
Switch directly to the
measured value display
with
<M>
.
Data storage
/
Cali-
bration data storage
/
Output to RS232
-
Outputs to the interface the
calibration records of all
sensors.
Summary of Contents for Multi 350i
Page 10: ...Overview Multi 350i 8...
Page 82: ...Operation Multi 350i 80...
Page 106: ...Appendix Firmware Update Multi 350i 104...
Page 107: ......
