wtw MIQ, Operating Manual, Page: 13 / 32

IQ S
ENSOR
N
ET
MIQ/T2020 Operation
4 - 1
4 Operation
4.1 Introduction
The MIQ/T2020 terminal is a control unit for the IQ S
ENSOR
N
ET
.
The terminal can be used to:
l
Display measured values
l
Start calibration
l
Perform system and terminal settings
l
Display messages.
Note
To guarantee data security within the IQ S
ENSOR
N
ET
, access to the
following functions is only possible from one terminal at the same time:
l
Opening the Settings/Einstellungen menu
l
Starting the calibration
l
Assigning sensors or output modules as substitutes.
If one of these functions is active at another terminal, a note appears
on the display.