Installation
IQ S
ENSOR
N
ET
MIQ/CHV
3 - 12
3.4.5
Mounting under the SD/K 170 sun shield
If a single module is to be installed outside, it must be provided with a
sun shield that protects it against the effects of weather. The SD/K 170
sun shield can be mounted directly on a wall, on a mounting stand or
on a railing. The MR/SD 170 mounting kit is also required for mounting
on a mounting stand or railing.
Note
How to mount the sun shield at the installation location is described in
the instructions for the sun shield or mounting kit.
Materials required
l
SD/K 170 sun shield (see chapter 7 A
CCESSORIES
AND
OPTIONS
)
l
The MR/SD 170 mounting kit is also required for mounting the sun
shield on a mounting stand or railing (see chapter 7 A
CCESSORIES
AND
OPTIONS
).
Tools
l
Phillips screw driver.
Mounting the module
under the sun shield
Fig. 3-11 Mounting the module on the SD/K 170 sun shield
6
Remove the two screws (pos. 1 in Fig. 3-11) and swing open
the module lid.
2
1
