wtw IQ SENSOR NET System 2020 XT, Operating Manual

Page: 95 / 216

System 2020 XT C
ONNECT
Operation
4 - 21
ba75970e01 10/2012
4.5.5 Transmitting recorded measuring data to a PC
Recorded measured values can be transmitted to a PC via the Ethernet
interface. For details on data transmission, see section 6.
4.5.6 Display of the measured values of a measurement location or
of all IQ sensors in the system
As soon as a terminal is docked onto a measurement location, the local
measured value display becomes active. The IQ sensors selected for
the measurement location appear on the measured value display (see
section 5.7).
Switch between the measured values for the measurement location
and all IQ sensors as follows:
1 Switch to the measured value display with <M>.
2 Using <OK>, open the
Display/Options
menu.
3 Using <

>, select the menu item,
Display local values
or all values
and confirm with <OK>. The measured value dis
-
play switches between the display of the sensors at the mea
-
surement location and all sensors.