wtw IQ SENSOR NET System 2020 XT, Operating Manual

Page: 125 / 216

System 2020 XT C
ONNECT
Settings/setup
5 - 13
ba75970e01 10/2012
5.6.3 Output links/settings
5.7 Settings for a measurement location
Primarily, the settings for a measurement location simplify the calibra
-
tion of IQ sensors if several IQ sensors of the same type are operated
on the system. The option of hiding IQ sensors on the measured value
display that are not operated at the measurement location helps to find
IQ sensors at the measurement location quickly.
Measurement location-related settings become effective as soon as a
terminal is docked on an MIQ module. Measurement location-related
settings include:

the location name (module name)

the selection of the sensors for the measured value display.
Fig. 5-12 170 - Location display
The procedure and possible settings for linking outputs with
sensors are given in the operating manual of the respective
output module.
1 Using <S>, open the
Settings
menu.
2 Using <

> and <OK>, select and confirm the menu
item,
System settings
->
Location display
.
The
170 - Location display
display opens.