wtw IQ SENSOR NET System 2020 XT, Operating Manual

Page: 62 / 216

Installation System 2020 XT C
ONNECT
3 - 34
ba75970e01 10/2012
3.6.5 Top hat rail mounting
Materials required

THS/IQ kit for top hat rail mounting (see chapter 12 A
CCESSORIES
AND OPTIONS
).
Tools

Phillips screw driver.
Mounting the MIQ module
on a top hat rail
Fig. 3-23 Mounting the MIQ module on a top hat rail
1 Screw the clamping assembly (pos. 1 in Fig. 3-23) onto the
back of the MIQ module with the two plastic tapping screws
(pos. 2).
2 Attach the MIQ module onto the top hat rail from above using
the clamping assembly and press against the rail until the
clamping assembly clicks into place. The MIQ module can be
moved sideways afterwards.
3 To unhook the MIQ module, press it downwards and pull it for
-
wards at the bottom.
B
ei
St
apelm
ont
age
Aufkleber
ent
fernen
und
K
ont
aktträger
m
ontieren
For
st
ack
m
ounting
rem
ove
label
and
inst
all
cont
act
carrier
1
2