wtw IQ SENSOR NET System 2020 XT, Operating Manual

Page: 60 / 216

Installation System 2020 XT C
ONNECT
3 - 32
ba75970e01 10/2012
3.6.4 Panel mounting
Materials required

PMS/IQ kit for panel mounting (see chapter 12 A
CCESSORIES AND
OPTIONS
).
Tools

3 mm set screw wrench (contained in the panel installation kit).
Mounting the MIQ module
on a panel
Fig. 3-22 Mounting the MIQ module on a panel
The space required on the panel for a module stack is given
in the dimension drawings in section 11.3.
The front MIQ module of the preassembled module stack
must be removed in order to install the stack. After the
installation of the front MIQ module, the remaining part of
the stack can be added to the installed MIQ module (see
section 3.5.2 S
TACKED MOUNTING OF
MIQ
MODULES
: -
Variant 2).
1 Insert the MIQ module in the panel aperture from the front.
Bei
St
apelmont
age
Aufkleber
ent
fernen
und
Kont
aktträger
montieren
For
st
ack
mounting
remove
label
and
inst
all
cont
act
carrier
1
2
3
3
2