wtw IQ SENSOR NET System 2020 XT, Operating Manual

Page: 56 / 216

Installation System 2020 XT C
ONNECT
3 - 28
ba75970e01 10/2012
3.6.2 Mounting on a mounting stand with the SSH/IQ sun shield
Materials required

SSH/IQ sun shield (see chapter 12 A
CCESSORIES AND OPTIONS
).
Tools

4 mm set screw wrench

Phillips screw driver.
Mounting the sun shield
on a mounting stand
Fig. 3-18 Mounting the SSH/IQ sun shield on a mounting stand
1 Screw the sun shield (pos. 1 in Fig. 3-18) with the four hex
-
socket head screws (pos. 2), the washers (pos. 3) and the
clamps (pos. 4) at the required height on the mounting stand
from the back.
2
3
4
1