Overview
MIQ/PS
1 - 2
ba64113e02
12/2005
1.2
Features of the MIQ/PS
General characteristics
The MIQ/PS wide-range power supply supplies the IQ S
ENSOR
N
ET
with its operational voltage. The operational voltage is forwarded to the
consumers in the following ways:
!
In the case of stacked mounting, via the IQ S
ENSOR
N
ET
contacts on
the front and rear of the module
!
In the case of distributed mounting, via the IQ S
ENSOR
N
ET
SNCIQ
cable
!
In the case of sensors, via the SACIQ sensor connecting cable.
With the standard MIQ module housing, the MIQ/PS has the same
characteristics as all MIQ modules regarding stability, leakproofness
and weather resistance. It also provides the same wide variety of instal-
lation options (stacked mounting, canopy mounting, tophat rail
mounting, etc.).
The number of MIQ/PS that are required depends on the number of
consumers in the system and their power requirement as well as on the
overall loss of power in the IQ S
ENSOR
N
ET
cables. Instructions for
determining the correct number of power modules are given in the
I
NSTALLATION
chapter of the system operating manual.
Terminal strip
The MIQ/PS has the following electrical connections on the terminal
strip inside the housing:
!
1 x mains connection, two-pole
!
3 x SENSORNET connection.
Luggage Point WRP Water Reclamation (MIQ/PS) Vendor Manual
Doc Id: 006465
Active: 02/04/08
Page 6 of 20
