MIQ/PS
Installation
3 - 5
ba64113e02
12/2005
Warning
No free wires are allowed to project into the housing. Otherwise,
there is a danger that safe areas could come into contact with dan-
gerous voltages. This could lead to danger when working with the
IQ S
ENSOR
N
ET
. Always cut off any wires that are not in use as
closely as possible to the cable gland.
Bild 3-3
Closing the cable opening
11
Close the module.
12
Screw the remaining cable glands with the sealing rings into
the remaining free openings. Close them with the provided
blind plugs (pos. 4 in Bild 3-3) and tighten the coupling rings
(pos. 3) if they are not used.
4
3
Luggage Point WRP Water Reclamation (MIQ/PS) Vendor Manual
Doc Id: 006465
Active: 02/04/08
Page 13 of 20
