wtw DIQ/S 282, Operating Manual, Page: 87 / 186

DIQ/S 28X Settings/setup
87
ba77168d02 03/2017
In the Edit list of sensors display, you can:
 assign sensor names (see section 5.4.1)
 delete inactive datasets (see section 5.4.1)
 change the order of the display of measured values on the measured value
display (see section 5.4.2).
5.4.1 Entering / editing a name for an IQ sensor
For the easier identification of the IQ sensors you can assign an individual name
to each IQ sensor.
Fig. 5-4 Edit list of sensors
1 Open the Einstellungen/Settings menu with <S> .
2 Using <

> and <OK> , select and confirm the menu item, System
settings -> Edit list of sensors .
The Edit list of sensors display opens.
3 Using <  > , highlight the Sensor name column. Confirm with
<OK> .
4 Using, <  > highlight the name of a sensor and confirm with
<OK> .
5 Enter the name with <  > and <OK> and confirm with <OK> (see
section 5.4.1).