wtw DIQ/S 282, Operating Manual, Page: 148 / 186

Outputs DIQ/S 28X
148
ba77168d02 03/2017
Fig. 7-16 Settings of outputs and links
7.7.1 Recorder
Function The measured values of the linked sensor at the current output are set up as cur-
rent intensity in the
Recorder application. The output of measured values is laid
down in the Recorder type , Start value and End value settings.
5 Using <  > , highlight a line for a current output (Cx) in the column
Feature . Confirm with <OK> .
The Settings of outputs and links display opens.
6 Using <

> , highlight the menu item, Current output , and confirm
with <OK> .
7 Select and confirm a function with <  > and <OK> .
Function Settings
No function
The current output is not used.
Recorder
see section 7.7.1
PID controller
see section 7.7.2
Fixed current value
see section 7.7.3
8 Make the settings for the current output with <  > and <OK> .
9 Using <

> and <OK> , highlight and confirm Save and quit .
The new settings are stored.