2-4
Unit Description
2.4. VMR-HD4D Series - Back Panel
As shown in Figure 2.4, the VMR-HD4D Series Back Panel includes the following
components:
1.
Power Circuit A - Power Inlet:
Supplies power to VMR control functions and
Circuit "A" outlets.
Notes:
• VMR-HD4D16 and VMR-HD4D20 units feature detachable power supply
cables.
• VMR-HD4D30 units feature attached power supply cables with
NEMA L6-30P Plugs.
• VMR-HD4D32 units feature attached power supply cables with
IEC 60309 Plugs.
2.
Power Circuit B - Power Inlet:
Supplies power to VMR control functions and
Circuit "A" outlets. Please refer to the notes under item 1 above.
3.
Power Circuit A - Switched Outlets:
AC Outlets that can be switched On, Off,
rebooted or set to default state in response to user commands.
4.
Power Circuit B - Switched Outlets:
Same as Item 3 above.
5.
Alarm Indicator Lights:
Two LEDs which light when an alarm condition is detected
at the corresponding power circuit. For information on Alarm Configuration, please
refer to the WTI Firmware Guide.
6.
SetUp Port:
An RJ45 RS232 serial port (DCE configuration) used for connection to
a local terminal or external modem, as described in Section 4.3. For a description
of the Setup Port interface, please refer to Appendix B.
7.
Network Port:
An RJ45 Ethernet port for connection to your 10/100/1000Base-T,
TCP/IP network. Note that the Network Port also includes two, small LED indicators
for Link and Data Activity. For more information on Network Port configuration,
please refer to the WTI Firmware Guide.
A
B
10/100 BaseT
SETUP PORT
ACT
ALM
LINK
A
B
A1
A2
B1
B2
1
2
3
4
5
6
7
Figure 2.4: VMR-HD4D Series - Back Panel (Model VMR-HD4D32 Shown)
