/F
Set System Parameters
Displays a menu which is used to define the Site ID message and Supervisor Password. When
the Supervisor Password is defined, the APS will display a password prompt before allowing
access to command mode. For more information, refer to Section 5.4.
Note:
Make certain to record your Supervisor Password for future reference. If the
Supervisor Password is lost or forgotten, you will not be able to access Supervisor
Level commands.
Availability:
Supervisor Only
Format:
/F
[Enter]
Response:
Displays System Parameters Menu
/H
Help
Displays a Help Screen, which lists all APS commands along with a brief description of each
command.
Availability:
Supervisor / User
Format:
/H
[Enter]
Response:
Displays Help Screen. Note that the User Level Help Screen does not include
Supervisor Level Commands.
/I
Default and Test
Tests internal memory and initializes the unit with the default parameters specified by the
SetUp Switches.
CAUTION:
When
/I
is invoked, the APS will revert to the parameters
specified by the SetUp Switches. Command selected parameters will be lost.
Availability:
Supervisor Only
Format:
/I[/Y]
[Enter]
Where
/Y
is a command option used to suppress the "Sure?" prompt.
Response:
Verbose:
"Are You Sure (y/n)?", if Y, memory test and initialization begins.
Terse:
5, if Y, memory test and initialization begins.
/J
Display Site ID
Displays the user-defined Site I.D. message.
Availability:
Supervisor / User
Format:
/J
[Enter]
Response:
Displays Site I.D. Message
9-7
APS Series - Asynchronous Port Switches, User's Guide
Command Reference Guide
