MReX Programming Board 1.0
Programming Requirements
In order to program the MReX board you need:
•
A USB cable with micro USB connector for the programming board to PC connection
•
A PC with a USB port
•
A serial terminal application/software. We recommend the use of the WTE serial terminal
application, which can be downloaded at no cost from our WTE website.
(
https://www.wte.co.nz/tools.html
)
•
An MReX 460 module or MReX PCB board that is to be configured.
© WTE Limited, 2022 – Christchurch New Zealand
Page 5 of 11