on the U19 socket
page 2-6
SRAM Voltage Selector
=====================
MP058 provides two types of voltage value for the SRAM, 5V voltage for
mix-mode DIP type SRAM , 3.3V voltage for 3.3V DIP type SRAM and synchronous
cache module.
JP29 JP30
OPEN 1-2,3-4,5-6 for MIX Mode SRAM
1-2,3-4,5-6 OPEN for 3.3 Volts DIP SRAM or
Synchronous Cache Module
AT Bus Speed Selector Yellow jumper Cap
=======================================
JP15
1-2 PCI Clock 1/3 (for higher speed)
2-3 PCI Clock 1/4
Note: Please use 1/4 clock for old version add-on card.
Printer Port ECP Function Selector
==================================
JP5 JP6
1-2 1-2 for ECP Mode
2-3 2-3 for Normal Mode
Flash ROM Voltage Selector Red jumper Cap
=========================================
JP14
OPEN EPROM
1-2 Flash ROM 12 Volts ( Intel Brand )
2-3 Flash ROM 5 Volts ( SST or Winbond Brand)
Note: The brand name of BIOS is under the BIOS.
page 2-7
Memory Configuration
====================
Memory Module Combinations
Bank O Bank 1 Total Memory Using Sockets
Socket 1 & 2 Socket 3 & 4 1 through 4
4MB x 2 None 8MB
8MB x 2 None 16MB
16MB x 2 None 32MB
32MB x 2 None 64MB
None 4MB x 2 8MB
None 8MB x 2 16MB
None 16MB x 2 32MB
None 32MB x 2 64MB
4MB x 2 4MB x 2 16MB
4MB x 2 8MB x 2 24MB
4MB x 2 16MB x 2 40MB
4MB x 2 32MB x 2 64MB
8MB x 2 4MB x 2 24NB
8MB x 2 8MB x 2 32MB
8MB x 2 16MB x 2 48MB
8MB x 2 32MB x 2 80MB
16MB x 2 4MB x 2 40MB
