Original Operating Instructions
BATx0100-ES-1-400-1
Installation
O_BATx0100-ES-1-400-1_V3.1_GB
Page
34
of
73
3.5.1.3 DC Connection
Prerequisites:
If the battery has no circuit breaker or fuse, a circuit breaker or fuse
must
be
installed between the battery and the product. This must be able to securely
switch off the short-circuit current of the battery under fault conditions.
Figure 13: DC connection
Pos. Description
1
Protective cover
2
DC (+)
3
DC (-)
4
DC circuit breaker (-Q1)
Procedure:
1.
Remove
the protective cover (Figure 13).
2.
Check
the correct polarity.
3.
Connect
the DC (+) and DC (-) cables onto the corresponding terminal.
4.
Tighten
the screws with a torque of
15 Nm
.
NOTICE: The cable lugs must be suitable for M8 screws.
5.
Mount
the protective cover.
Summary of Contents for BAT 0100-ES-1-400-1 Series
Page 73: ......
