WSS SPRINT Slide Line, Original Assembly And Maintenance Instructions

Page: 30 / 38

30 GB
SPRINT – Slide Line Sliding Door System
Wilh. Schlechtendahl & Söhne GmbH & Co. KG
Before Installation
Required Tools

Hammer drill

HSS-concrete- or manson drill,
appropriate fixing-material

Water level

Allen key SW2,5; 3; 4; 5

Phillips screwdriver

Scissors

Plumb
Preparations
ATTENTION! Glass and gaskets have to
be dust- and grease free – if necessary, please
clean with standard glass cleaner.
ATTENTION! The clamping- and floor
guide area must not be satined, coated or
altered on the surface in any other way!
Fixing Material:
For wall (M6)- or ceiling (M6) installation you
require suitable fixing material.
ATTENTION! Select only suitable fixings
depending on the floor-, wall- and ceiling
conditions! The screw heads must not protrude
from the track.
Adhesive Pads:
The adhesive pads have a high adhesive
strength. The final strength will be achieved
after 24 hours.
SW2,5/3/4/5