background image

TO  THE  READER

This Workshop Manual has been prepared to provide servicing personnel with

information on the mechanism, service and maintenance of L2800 and L3400.  It is
divided into three parts, "General", "Mechanism" and "Servicing".

General
Information on the tractor identification, the general precautions, maintenance check

list, check and maintenance and special tools are described.

Mechanism
Information on the construction and function are included.  This part should be

understood before proceeding with troubleshooting, disassembling and servicing.

Refer to Diesel Engine / Tractor Mechanism Workshop Manual (Code No. 9Y021-

01874 / 9Y021-18201) for the one which has not been described to this workshop
manual.

Servicing
Information on the troubleshooting, servicing specification lists, tightening torque,

checking and adjusting, disassembling and assembling, and servicing which cover
procedures, precautions, factory specifications and allowable limits.

All information illustrations and specifications contained in this manual are based on

the latest product information available at the time of publication.

The right is reserved to make changes in all information at any time without notice.
Due to covering many models of this manual, information or picture being used have

not been specified as one model.

January 2004

© KUBOTA Corporation 2004

KiSC issued 08, 2007 A

Summary of Contents for L2800

















Reviews: