WSL TyrePal Solar User Manual Download Page 11 | Manualshive

Page: 11 / 16

WSL TyrePal Solar User Manual Download Page 11

10

9. ALARM CONDITION

High / Low Pressure Alert / High Temperature Alert / Fast Leakage Alert / Sensor
Low Battery Alert

The monitor displays the temperature and the pressure data of four sensors simultaneously. The
corresponding alert icon and red LED will flash together with a warning beep when the sensor
detects abnormal conditions from the tyre. The faulty tyre and/or battery alarm

(

) icons will continue to flash until the problem has been resolved.

Factory default setting

High pressure alarm level

44PSI (3.0BAR)

Low pressure alarm level

29PSI (2.0 BAR)

High temperature ºC alarm level

70ºC

9.1 High pressure alert

If the front left tyre pressure is 45PSI, the monitor will alert together with a warning beep and
the red LED will flash.

Pressure data flash

Tyre icon flash

9.2 Low pressure alert

Alert icon flash

If the front left tyre pressure is 28PSI, the monitor will alert together with a warning beep
and the red LED will flash.

Pressure data flash

Tyre icon flash

Alert icon flash

«
...
9
10
11
12
13
...
»

Summary of Contents for TyrePal Solar

















Reviews:

No comments