WS824 WS848-5D Manual Download

Page: 32 / 72

Notice:

For example, if the extension number 70 already exists, such Numbers as 701

and 7066 cannot exist. Suppose you want to dial 7005 on any other extension, and

when you dial 70, it will call the extension number 70.

6.2.1 Change extension number on programming host extension

The operator dial #97 to query the current physical port number on the extension

to be changed. And then change the extension number according to the instructions in

this section.

Example:

Change the extension number of port 5 to 6005.

Operation:

The programming host extension off-hook, then dial *#99 6666# into

programming mode, continue to dial 30 005 6005#, on-hook after hearing the prompt

tone.

Extension 5 off-hook, and then dial #97 to query the current extension number.

Instructions: #97

Non-programming instruction! Directly dial on any extension after it is

off-hook.

Instruction: 30 T Q#

Change the extension number of specified port.

Description:

T is the physical port number, and the effective value is 001-256,

indicating extension 1 to extension 256;

Q is the new extension number with 1-5 digits.

WEB:WWW.WS824.ORG TEL:020-85261379 18144823824

Summary of Contents for WS848-5D









































































Search results

Summary of Contents for WS848-5D

Reviews:

Related manuals for WS848-5D

Brands by name

Popular brands

WS824 WS848-5D, Manual

Search results

Summary of Contents for WS848-5D

Reviews:

Related manuals for WS848-5D

Brands by name

Popular brands