13
Function ON/OFF
Press 6
” ” on the basic setting menu, the screen will show:
Snapshot ON/OFF: If this function enabled on Gate Station and Guard Center,when door phone call
other tenant or Guard Center,Guard Center will snap a picture.
Lift ON/OFF: When system is connecting with lift,press”1" to activate lift control.Thus,when tenant
unlock for Gate Station,lift will go to the place where Gate Station is.
Key tone ON/OFF: When key tone is on,each time press the key ,“Di” can be heard.
Disarm by card: When disarm by card is on,the tenant swipe the card to unlock and disarm door phone.
Recording ON/OFF: When this function enabled on IP door phone and Gate Station, Gate Station can
leave message for the tenant.
Magnetic alarm: When Gate Station is connecting with door contact, enable magnetic alarm is sug-
gested.Thus,if door release exceed delay time of door contact and not close the door,it will report
the alarm to Guard Center.
Press number keys to clear up the data in the input box.Input ”0” or ”1” to set, press”#” to confirm,the
screen will prompt that modify successfully and activate the next input box automatically.
Press”*” to exit input status.
or
to return to previous menu or exit automatically after 30s.
Non-input status,press ”7”
” ”
*
Operation
Operation
1
Snapshot
ON/OFF
2
Lift
ON/OFF
3
Key tone ON/OFF
4
Disarm by card
5
Recording
ON/OFF
6
Magnetic alarm
7
Return
1
0
0
0
1
0
0
OFF
1
ON
