Wright Manufacturing Stander ZK Owner'S Manual Download Page 19

19 

 

 

 

 

 

 

Wright  Manufacturing,  Inc.  (hereinafter:  WMI)  warrants  to  the  original 
owner that the new WMI mower accompanying this document will be  
free from manufacturing defects in materials or workmanship subject to 
the  following  limitations  and  exclusions.    Any  part  of  the  WMI 
commercial mower manufactured by WMI and found, in the reasonable 
judgment of WMI, to be defective in materials or workmanship, will be 
repaired  or  replaced  by  an  Authorized  WMI  Service  Dealer  without 
charge for parts and (except as excluded below) labor.  This Warranty 
is  limited  to  the  original  Owner  and  the  mower  this  document  was 
provided with and is not transferable.  Dealer demo units with less than 
fifty  hours  when  first  retailed  shall  also  be  covered  by  this  limited 
warranty.    Proofs  of  Purchase,  Authorized  Dealer  performed  Pre-
Deliver Service and the First Eight Hour Service will be required by the 
Authorized  WMI  Service  Dealer  to  substantiate  any  warranty  claims.  
All  WMI  warranty  work  must  be  performed  by  an  Authorized  WMI 
Service  Dealer  and  item  must  be  delivered  to  the  dealer  prior  to  the 
expiration  of  the  warranty  period.    This  Warranty  is  limited  to  the 
following specified periods from the date of the original retail purchase 
for  defects  in  materials  or  workmanship  and  will  commence  upon  the 
date  of  original  retail  purchase.    This  warranty  shall  apply  only  if  the 
warranty registration form has been completed and returned to Wright 
Manufacturing,  Inc.  within  14  days  from  the  date  of  original  retail 
purchase.  This  warranty  includes  only  the  cost  of  parts  and  labor 
(when  applicable).    This  warranty  applies  only  to  the  replacement  of 
defective  or  otherwise  warrantable  WMI  OEM  parts  being  replaced 
with WMI OEM parts. 
 

 

All parts and components (except as noted below) – 2 years  

 

Belts – 90 days  

 

Battery – 90 days 

 

Engine  –  warranty  covered  by  engine  manufacturer  and 
handled through the respective Authorized engine Dealers 

 
Exclusions: 

Any damage or deterioration due to normal use, wear and tear or 
exposure 
All filters, engine oil, hydraulic oil, tires and tubes 
Bent, fractured or broken parts occurring through impact or hard use 
Clutch: linings, anti-rotation failure or other failure due to improper 

replacement installation 

Cost of regular maintenance service, parts or adjustments 
Worn bearings (other than spindle bearings; see above) 
Worn bushings, cotters, clips, pins and retainers 
Grease fittings/zerks 
Paint, paint fading, cosmetic imperfections and steel surface 
imperfections 
Fabric, cushion and rubber grip wear or damage 
Cutting blades, light bulbs, fuses 
Damage due to loose pulleys on shafts 
Damage due to loose wheel hubs on tapered hydraulic motor shafts 
Fire Damage 
Abrasion or corrosion wear or damage 
 

Repair Parts Replaced During Original Warranty 
All Repair parts (excluding wear or otherwise excluded items) installed 
during the warranty period are warranted until the end of the respective 
original period according to the categories above except in the case 
that the respective original warranty period expires in less than ninety 
(90) days after the installation of the part(s).  If this happens then the 
parts are warranted for a total of ninety (90) days from the time of their 
installation. 

 

Rental Use 
The above warranty periods are limited to maximum of ninety (90) 
days for mowers that are used for rental purposes. 

 

 
 
 
 
 
 

The WMI mower, including any defective part, must be returned to an 
Authorized  WMI  Service  Dealer  within  the  warranty  period.    The 
expense  of  lost  production  time  and  delivering  the  mower  to  the 
Authorized WMI Service Dealer for warranty  work and the expense of 
returning  it  to  the  Owner  after  repair  will  be  paid  for  by  the  Owner.  
WMI’s  responsibility  is  limited  to  making  the  required  repairs  and  no 
claim  of  breach  of  warranty  shall  be  cause  for  cancellation  or 
rescission  of  the  contract  of  sale  of  any  WMI  mower.    This  Warranty 
does  not  apply  to  any mower  that  was  delivered  to  an  Owner  prior  to 
the  Pre-Delivery  Service  as  specified  in  the  Owner’s  Manual.    This 
Warranty does not apply to any mower that was shipped in a crate to 
the  Owner  or  delivered  to  the  Owner  by  non-employees  of  an 
Authorized  Dealer.    For  the  Owner’s  protection  and  a  valid  Warranty, 
please  note:    WMI  does  not  permit  Authorized  Dealers  to  make  non-
face-to-face  deliveries  of  the mower  and  any  who  are  found  doing  so 
are  subject  to  immediate  cancellation  as  Authorized  Dealers.    This 
Warranty does not cover any mower that has been subject to misuse, 
neglect, negligence, burning in any fire, an accident, or that has been 
operated  or  maintained  in  any  way  contrary  to  the  operating  and 
maintenance  instructions  as  specified  in  the  Owner’s  Manual.    The 
Warranty does not apply to any damage to the mower that is the result 
of improper maintenance, or to any mower or parts that have not been 
assembled  or  installed  as  specified  in  the  Owner’s  Manual.    The 
Warranty does not cover any mower that has been altered or modified 
changing performance or durability.  In addition, the Warranty does not 
extend  to  repairs  made  necessary  by  normal  wear,  or  by  the  use  of 
parts  or  accessories  which,  in  the  reasonable  judgment  of  WMI,  are 
either  incompatible  with  the  WMI  mower  or  adversely  affect  its 
operation, performance or durability. 
 
WMI reserves the right to change or improve the design of any mower 
without  assuming  any  obligation  to  modify  any  mower  previously 
manufactured. 
 
All  other  implied  warranties  are  limited  in  duration  to  the  two  (2)  year 
warranty  period  or  ninety  (90)  days  for  mowers  used  for  rental 
purposes.    Accordingly,  any  such  implied  warranties  including 
merchantability,  fitness  for  a  particular  purpose,  or  otherwise,  are 
disclaimed  in  their  entirety  after  the  expiration  for  the  appropriate  two 
(2)  year  or  ninety  (90)  day  warranty  period.    WMI’s  obligation  under 
this Warranty is strictly limited to the repair or replacement of defective 
parts  and  WMI  does  not  assume,  or  authorize  anyone  to  assume  for 
them,  any  other  obligation.    Some  states  do  not  allow  limitations  on 
how  long  an  implied  warranty  lasts,  so  the  above  limitation  may  not 
apply. 
 
WMI  assumes  no  responsibility  for  incidental,  consequential  or  other 
damages including, but not limited to, expense for gasoline, expense of 
delivering  the  mower  to  an  Authorized  WMI  Service  Dealer  and 
expense of returning it to the Owner, damage by fire, mechanic’s travel 
time,  telephone  charges,  rental  of  a  like  product  during  the  time 
warranty  repairs  are  being  performed,  travel,  loss  or  damage  to 
personal property, loss of revenue, loss of use of the power equipment, 
loss of time or inconvenience.  Some states do not allow the exclusion 
or  limitation  of  incidental  or  consequential  damages,  so  the  above 
limitation or exclusion may not apply. 
 
This Warranty  gives  you  specific  legal  rights,  and  you  may  also  have 
other rights which vary from state to state. 
 
This Warranty  applies to  all WMI mowers sold  in  the  United  States  of 
America and Canada. 
 
For the location of the Authorized WMI Service Dealer nearest you 
or  other  information,  such  as,  Parts  Lists  and  Owner’s  Manuals 
visit our website at: 

www.wrightmfg.com

 

Wright Manufacturing, Inc. 

4600-X Wedgewood Blvd. 

Frederick, MD 21703 

 

 

WRIGHT MANUFACTURING, INC. POWER EQUIPMENT LIMITED WARRANTY 

THIS WARRANTY SUPERSEDES ALL PREVIOUS ON UNITS WITH A RETAIL SALES DATE ON OR AFTER 04/01/05 

Summary of Contents for Stander ZK

























Reviews: