WALL UNIT
1000 Tall 2 Door
Assembly Guide
For Internal Use: FI.WR.INS.047_WKIN00132_WALL_1000_2Dr_Tall_Rev3.indd
Page 7
Step 20.
Insert hinge in top & bottom
holes as shown.
Step 21.
Secure hinges by tightening
2 x screws with hinge dowels
attached. These are already
positioned within the hinges.
Step 22.
Attach the door to unit
where required.
To attach door
clip hinge onto hinge
plate and click to secure.
Hinge Cover Caps
Step 24.
Fit cover caps to hinge.
Adjust Softclose to suit.
Step 23.
Adjust hinge to suit. As shown below.
Hinge Plates
View from Inside of Carcass
To
adjust
hinge using a screw
driver, tighten or loosen as
required at points
1
&
2
.
Point
1
- In - Out
Point
2
- side - side
1
2
FRONTAL HINGE
ADJUSTMENT
To
Release
door
Pull catch as shown,
to release hinge
from the hinge
plate.
The top and bottom
hinges
MUST
be
adjusted to the
SAME
STRENGTH.
