Wren 1000 Cornerstone, Assembly Manual

Page: 7 / 12

BASE UNIT
800 & 1000
Adjustable Corner
Assembly Guide
For Internal Use: FI.WR.INS.023_WKIN00105_BASE_Adj_Cnr_800 -1000_2 Dr_Rev2.indd Page 6
Step 14.
Secure each of the
legs into place with
2 x 15mm screws
(L) .
Step 16.
Push leg firmly down into leg base.
Adjust legs to 155mm before turning carcass upright. Once in situ level accordingly.
Ensure legs are
rotated as shown
so that part of it is
supporting the end
panels
(B) .
Front legs should
have flat edge to the
front.
Front
Leg position diagram
Front
C
C
B
L
L
B
Step 15.
Lightly hit centre peg of
leg base with hammer
until flush.
C
C
B
B