Wren Kitchens Vogue BASE UNIT 1000 2 Door, Assembly Manual, Page: 8 / 12

Page 7
BASE UNIT
Hob 2 Drw, 3 Drw & 2 Drw inc Dummy Assembly Guide
9mm
Step 7.
Slide back panel (A) into groove of end panels (B) .
The back panel (A) is to be modified accordingly
to suit Customer Requirements, prior to inserting
into unit.
Once back panel (A) is in position, ensure the
panel is flush & square with bottom of
end panels (B) .
Step 8.
Hand tighten all cam locks (H) , this will
expand cam dowels (G) and tighten the
unit together.
Step 9.
Ensure unit is square. Secure back panel (A) with
3 or 4 x 30mm screws (K) equally spaced at the
bottom of back panel (A) into base panel (C) , as
shown.
Ensure you screw into the centre of the base
panels
(C) (9mm from the edge).
B
E
C
A
K
K
K
B
C
A
600 unit used for reference only