Wren Kitchens MIDWAY CABINET, Assembly Manual, Page: 5 / 8

For Internal Use: 50-WKIN00110_MIDWAY_CABINET_Assembly_Rev1.indd Page 4
MIDWAY
CABINET
Assembly
Guide
Step 6.
Drill holes
5/16" (8mm) x 13/16" (20mm)
deep at the positions shown in the
diagram above,in the centre of the thickness of the back panel.
Back Panel
4 13/16"
(122mm
)
4 13/16"
(122mm
)
4 13/16"
(122mm
)
4 13/16"
(122mm
)
Height of back is the same as the length of the end panels
Width of back is the same as the length of
the shelves/top + bottom panel
Back
panel
centre of panel
23/64"
(9mm)
23/64"
(9mm)
3/8"
(9.5mm)
3/8"
(9.5mm)
25/64"
(10mm)
25/64"
(10mm)
3/8"
(9.5mm)
3/8"
(9.5mm)
25/64"
(10mm)
25/64"
(10mm)
23/64"
(9mm)
23/64"
(9mm)
Step 7.
Add some glue to the holes in the back panel and insert the dowels.
Step 8.
Add glue to the holes in the end panels and then assemble the cabinet.
Clamp the cabinet together whilst the glue dries to ensure tight joints.
Wipe off the excess glue.
It is important to be as accurate
as possible.