Page 8
For Internal Use: FI.WR.INS.037_WKIN00127_WALL_600_AdjCnr_Rev6.indd
Step 22.
Insert hinge in top & bottom
holes as shown below.
Step 23.
Secure hinges by tightening
2 x screws with hinge dowels
attached. These are already
positioned within the hinges.
Step 24.
Attach the door to unit
where required. Adjust
hinges to suit. See below.
To attach door, clip hinge
onto hinge plate and click
to secure.
Hinge Cover Caps
Step 26.
Fit cover caps to hinge.
Adjust Soft close to suit.
Step 25.
Adjust hinge to suit. As shown below.
Hinge Plates
The top and bottom
hinges
MUST
be
adjusted to the
SAME
STRENGTH.
To
adjust
hinge using
a screw driver, tighten
or loosen as required at
points
1
&
2
.
Point
1
-In-Out
Point
2
- Left - Right
1
2
FRONTAL
HINGE
ADJUSTMENT
View from inside of unit
To
release
door,
pull catch as shown,
to release hinge from
the hinge plate.
To
Move
the
hinge up/down,
loosen screws
A + B,
Manoeuvre
the door, then
re-tighten the
screws
A
B