Wren Kitchens BASE UNIT 150, Assembly Manual, Page: 5 / 8

BASE UNIT
150 -200 1 Door
Assembly Guide
For Internal Use: FI.WR.INS.019_WKIN00100_BASE_150-200_1Dr_Rev4.indd Page 4
Step 8.
Secure each of the legs into place
with 2 x 15mm screws
(L) per leg.
Step 9.
Lightly tap centre peg of leg
base with hammer until flush.
Step 10.
Push leg firmly down into leg base.
Adjust legs to 155mm before turning carcase
upright. Once in situ level accordingly.
Ensure legs are rotated as shown so that part
of it is supporting the end panels
(B) .
Front legs should have flat edge to the front.
C
C
B
B
C
B
Front
Front
Front
C
L L
B
Leg position diagram
B
B