For Internal Use:FI.PK.FIT.015_50-WKIN00019_MILANO_BASE3_ADJ_CNR_FITTING_Guide_Rev1
Page 4
ADJUSTABLE
CORNER
BASE CABINET
MILANO
Fitting
Guide
Adjustable
Corner Cabinet
(Cabinet A)
Cabinet B
Packer 2
Adjustable
corner post
part 2
Blanking
panel
Adjustable
Corner post
part 1
Packer 1
Cabinet A
Packer 2
Adjustable
corner post
part 2
Door width + 3/16”
Adjustable
Corner post
part 1
Blanking
panel
Packer 1
Step 11.
Secure cabinet B to the corner post
by screwing through the end panel
into packer 2 at the top and bottom
of the cabinet.
Make sure that the front of the
adjustable corner post and the
door are aligned.
Step 13.
Place cover caps over
visable screw heads to
conceal them on the
inside of cabinet B.
Step 12.
Secure cabinet B to the
wall using a Space-Plug
(U)
, as per instructions on
page 3.
Step 10.
Attach adjustable corner post to cabinet A, by screwing
through packer 1 at four locations, using
4 x 1 1/4” screws
(H)
.
(for location refer to customer kitchen plan)
Make sure that the distance between the front of the
corner post and the external face of the end panel is
the width of the door + 3/16” (4.5mm).