background image

14

4.0 USE AND OPERATION

4.1 Casters

Each caster is equipped with a dual-lock feature, which stops
the caster from swivelling and rolling simultaneously. To activate
the dual-lock, step on the end of the caster brake until it latches
in the “on” position. To deactivate the dual-lock, step on the
raised end of the dual-lock until it latches in the “off” position.

4.2 Wheel Locks

The wheel locks on a ZÜM-SP can be engaged by pushing
the handles forward. This stops the rear wheels from rotating.
For maximum stability, both wheel locks must be engaged.
To disengage the wheel locks, pull the handles backward.

4.3 Commode Pan

The RAZ commode pan is designed with an elongated shape
that fits directly under the seat to minimise back splash. A
unique splash-reduction ridge is located at the centre of the pan.
The high gloss surface facilitates cleaning and rinsing, while the
pouring spout and handle facilitate emptying. Removal of the
commode pan is achieved by sliding the pan rearward.

When re-inserting the pan, ensure that the pan is guided into the green
plastic brackets and pushed forward until it hits the stops.

IMPORTANT !

DO NOT USE ABRASIVE SCRUBBING POWDERS OR SCOURING PADS ON THE ZÜM-AP/SP.

DO NOT SUBMERGE THE ZÜM-AP/SP IN WATER.

RINSE THOROUGHLY AFTER CLEANING TO ENSURE THAT ANY SOAP OR DETERGENT
RESIDUE IS REMOVED.

DO NOT USE CLEANING PRODUCTS WITHOUT CONSULTING THE PRODUCT’S INSTRUCTIONS
AND TAKING APPROPRIATE PRECAUTIONS FOR HUMAN EXPOSURE TO CHEMICALS.

DO NOT USE CHLORINATED PRODUCTS ON THE ZÜM-AP/SP.

Summary of Contents for RAZ SP

















Reviews: