Make sure load is positioned correctly on lifter (as previously
directed).
Never disengage tilt and rotation latches at the same time,
because this could result in load damage or personal injury.
2A
3A
Rev 7.5/6-22
MRTALP4-DC3: #35058
25
T
O
T
ILT
THE
L
OAD
1) Make sure the load has enough clearance to tilt without contacting anyone or anything.
2) Use the control handle (fig. 2A) to keep the load under control at all times.
3)
Unbalanced loads may tilt unexpectedly when tilt
latch is disengaged.
Keep hands and fingers away from tilt linkage.
If the pad frame is
latched, pull the tilt
release lever (circled in
fig. 3A) to disengage the
tilt latch.
4) Lift upward or press downward on the control handle to tilt the load as desired.
1
Note: See
about allowable load overhang.
1..... Due to the tilt linkage design, load force on the control handle changes direction during the tilt.
OPERATION
