4x4 HDMI2.0 Matrix with Audio Matrix
10
7. IR Remote Control
The Matrix Switcher features one built-in IR receiver to receive IR signal from IR
remote to enable IR control. If the external IR receiver or other IR control device need
to be used, the IR IN port on rear panel can be connected.
①
Standby button:
Press it to enter/ exit standby mode.
②
INPUTS:
Input channel selection buttons, same with the
corresponding front panel buttons
③
OUTPUTS:
Output channel selection buttons, same with the
corresponding front panel buttons.
④
Menu buttons:
ALL
: Select all inputs/outputs.
To convert an input to all outputs:
Example: Input 1 to all Outputs:
→
Press INPUTS 1 + ALL + ENTER
EDID management button:
1) One input port follows the EDID data from one
output port.
Example: Input 2 learns EDID data from output 4:
→
Press EDID + INPUTS 2 + OUTPUTS 4+ ENTER
2) All input ports learn EDID data from one output
port.
Example: All input ports learn EDID data from output 3:
→
Press EDID + ALL + OUTPUTS 3 + ENTER
CLEAR:
Withdraw button.
ENTER:
Confirm operation.
INPUTS
OUTPUTS
MENU
1
2
3
4
1
2
3
4
ALL
EDID
CLEAR
ENTER
1
2
3
4
