Ultra-thin HDBaseT Receiver / Audio de-embedding
4
Rear Panel
No.
Name
Description
①
RS232 connector
If one is connected with control device (e.g. PC), and the other
should be connected with the third-party that need to be controlled.
②
IR IN
Work with far-end IR OUT port, connect with IR Receiver (with
carrier) to collect IR signal to control far-end display device from
local.
③
IR OUT
Work with far-end IR IN port, connect with IR Emitter to send IR
signal to control input source device.
④
HDMI OUT
HDMI type A connector, connect to display.
⑤
AUDIO OUT
3.5mm stereo audio jack, connect to analog stereo audio device.
⑥
COAX OUT
Coaxial audio connector, connect to digital audio device.
⑦
OPTICAL OUT
Optical audio connector, connect to optical audio devices.
⑧
HDBT IN
Connect to the HDBT OUT socket on HDBaseT Transmitter or
Matrix Switcher via CAT5e/6a/7 cable, support bidirectional PoH
technology.
⑨
DC 12V power port
Connect to 12VDC power adaptor, or it can be powered via the
HDBaseT Transmitter or Matrix Switcher by bidirectional PoH
technology.
Tx
Rx
DC 12V
AUDIO
OPTICAL
COAX
HDBT IN
IR IN
RS232
IR OUT
HDMI OUT
OUT
1
2
3
4
5
6
7
8
9