4
③
OUTPUT LEDs:
The LED illuminates green when there is HDMI output on the
corresponding channel.
④
DISPLAY ON Button and LED:
Press the button to turn on displays. The LED
blinks green when press this button to send control signal.
⑤
DISPLAY OFF Button and LED:
Press the button to turn off displays. The LED
blinks green when press this button to send control signal.
⑥
VOLUME DOWN/MUTE Button:
Press the button to decrease the volume of
displays. Press and hold this button at least three seconds to mute the displays.
⑦
VOLUME UP Button:
Press the button to increase the volume of displays or exit
mute mode if the displays is already in the mute mode.
⑧
EDID:
3-pin DIP Switch for the Extended Display Identification Data (EDID) value
setting. Please refer to the
EDID Management
for more details.
⑨
FW:
Micro-USB port for firmware upgrade.
Note:
Only the displays which support CEC can be controlled by
DISPLAY ON
,
DISPLAY OFF
,
VOLUME UP
and
VOLUME DOWN
buttons.
Rear Panel
①
INPUT:
Type-A female HDMI input port to connect a HDMI source.
②
OUTPUTS:
Eight type-A female HDMI output ports to connect HDMI displays.
③
EDID:
4-pin DIP switch for EDID setting. Please refer to the
5.EDID Management
for more details.
④
DC 12V:
DC barrel port to connect an AC power adapter.
1
2
3 4
