4
④
EDID:
4-pin DIP switch for EDID setting and HDCP mode selection. Please refer
to the
EDID Management
for more details.
⑤
FW:
Micro-USB port for firmware upgrade.
Rear Panel
①
INPUT:
Type-A female HDMI input port to connect a HDMI source.
②
OUTPUTS:
Two type-A female HDMI output ports to connect HDMI displays.
③
DC 5V:
DC barrel port to connect an AC power adapter.
DIP Switch Operation
EDID Management
The Extended Display Identification Data (EDID) is used by the source device to
match its video resolution with the connected display. By default, the source device
obtains its EDID from the first connected display. Meanwhile, since the displays with
different capabilities are connected to the splitter, the DIP switch on the front panel can
be used to set the EDID to a fixed value to ensure the compatibility in video resolution.
The switch represents “
0
” when in the lower (
OFF
) position, and it represents “
1
” while
putting the switch in the upper (
ON
) position.
Switch 1~3 are used for EDID setting. The DIP switch status and its corresponding
1
2
IN
DC 5V
IN
1
2
3
