8x2 HDMI 2.0 Seamless Matrix Switcher
41
Command
Description
Feedback Example
Baudrate 57600.
Set the RS232 baud rate of switcher to
57600.
Set Local RS232 baudrate is
57600!
Baudrate 115200.
Set the RS232 baud rate of switcher to
115200.
Set Local RS232 baudrate is
115200!
8.2.10 CEC Control
If the input sources and displays support CEC, they can be controlled by sending CEC
commands to replace IR remote.
Step 1:
According to the below command to enable CEC control.
Command
Description
Feedback Example
CECON.
Enable CEC
CEC Turn ON!
CECOFF.
Disable CEC
CEC Turn OFF!
Step 2:
According to the below command format to send specific command to control
input source or display device.
CEC[I/O][port][command].
l
The “
[I]
” represents the input port. The “
[O]
” represents the output port.
l
The “
[port]
” represents the port number. The input ports are 01~05, and the output
ports are 06~08.
l
The “
[command]
” represents the specific command from the table below.
ü
Control the input source:
Command
Description
Example and Feedback
CECI[port]00.
Confirm operation (Enter).
CECI0100.
[CEC]: blue ray OK.
CECI[port]01.
UP.
CECI0101.
[CEC]: blue ray up.
CECI[port]02.
DOWN.
CECI0102.