CE-EX50
11
8.
Wideband IR (30KHz---60KHz) introduction
IR BLASTER (TX)
To control the source
:
Plug IR Blaster into IR TX port of transmitter unit; place
blaster in front of the IR eye of the source.
To control the display
:
Plug IR Blaster into IR TX port of receiver unit; place blaster
in front of the IR eye of the display.
IR RECEIVER (RX)
To control the source
:
Plug IR Receiver into IR RX port of receiver unit; place
receiver at or near display.
To control the display
:
Plug IR Receiver into IR RX port of transmitter unit; place
receiver in position where it is able to receive remote signals
