P.1
P.2
Introduction
Battery Information
Thank you for purchasing
RoboMe™ from WowWee™!
The latest fusion of personality and technology, RoboMe™ is a customizable robotic buddy. Use the power of
your smart device to unleash his character or to create your own RoboMe™ look and reactions. Packed with
advanced technology, RoboMe™ can also act as a mobile camera, understand vocal commands and more!
Take a few minutes to look through this user manual to get RoboMe™ working.
Package Contents:
1 x RoboMe™
1 x Remote Controller
1 x User Manual
Remote Controller
BATTERY REQUIREMENTS:
Your robot is powered by 4 x “C” size Alkaline batteries (not included).
Your remote controller is powered by 3 x “AAA” batteries (not included).
BATTERY INSTALLATION:
• Be sure the robot power button is in the OFF position before installing or changing batteries.
• Remove the battery covers with a Phillips/crosshead screwdriver as shown (not included).
• Install recommended batteries as shown, making sure battery polarity is correct (batteries not included).
• Replace battery doors and carefully tighten all screws.
IMPORTANT BATTERY INFORMATION:
• Use only fresh batteries of the required size and recommended type
• Do not mix old and new batteries, different types of batteries [standard (Carbon-Zinc),
Alkaline or rechargeable] or rechargeable batteries of different capacities
• Remove rechargeable batteries from the toy before recharging them
• Rechargeable batteries are only to be charged under adult supervision
• Please respect the correct polarity, (+) and (-)
• Do not try to recharge non-rechargeable batteries
• Do not throw batteries into fire
• Replace all batteries of the same type/brand at the same time
• The supply terminals are not to be short-circuited
• Remove exhausted batteries from the toy
• Batteries should be replaced by adults
• Remove batteries if the toy is not going to be played with for some time
LOW BATTERY INDICATORS:
• When RoboMe™ ’s batteries grow weak, your RoboMe™ will move very slowly. When this occurs,
power robot OFF and replace all batteries.
• When the remote controller’s batteries grow weak, you may not be able to send commands to the robot,
and it will be unresponsive. When this occurs, replace all batteries.
RoboMe™ : Base and Back
Remote Controller : Base
Application Minimum System Requirements
- iPhone
®
4; iPod Touch
®
4th Generation
- iOS 6
For iPhone
®
, iPod Touch
®
(not included)
• When using RoboMe™, adult supervision is required, especially when changing the batteries.
• Do not immerse RoboMe™ or any parts in water or any other form of liquid.
• Do not drop, throw, or kick RoboMe™ as this might damage mechanical functions.
• Robot will just stop when battery power gets VERY low. Power off and replace all batteries.
• Some lighting or sunlight can interfere with infra-red signals.
Note:
Note:
Base
Back
1.5V “AAA”LR03 / UM4
1.5V “AAA”LR03 / UM4
1.5V “AAA”LR03 / UM4
1.5V “C”
LR14 /
UM2
1.5V “C”
LR14 /
UM2
RoboMe™
1.5V “C”
LR14 /
UM2
1.5V “C”
LR14 /
UM2
