background image

 

 

 

 

 

For the customers in the U.S.A. 

CAUTION: 

Changes or modifications not expressly approved by the party responsible for compliance could void 
the user's authority to operate the equipment. 

NOTE: 

This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  A  digital  device, 
pursuant  to  Part  15  of  the  FCC  Rules.  These  limits  are  designed  to  provide  reasonable  protection 
against  harmful  interference  when  the  equipment  is  operated  in  a  commercial  environment.  This 
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in 
accordance  with  the  instruction  manual,  may  cause  harmful  interference  to  radio  communications. 
Operation of this equipment in a residential area is likely to cause harmful interference in which case 
the user will be required to correct the interference at his or her own expense. 

For the customers in Canada 

This Class A digital apparatus complies with Canadian ICES-003. 
Cet appareil num

é

rique de la classe A est conforme 

à

 la norme NMB-003 du Canada. 

For the European customers only 

The crossed out wheeled bin label that can be found on your product indicates that this product should 
not be disposed of via the normal household waste stream. To prevent possible harm to the 
environment or human health please separate this product from other waste streams to ensure that it 
can be recycled in an environmentally sound manner. For more details on available collection facilities 
please contact your local government office or the retailer where you purchased this product. 

 

This information only applies to customers in the European Union, according to Directive 
2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 27 January 
2003 on waste electrical and electronic equipment (WEEE) and legislation transposing and 
implementing it into the various national legal systems.For other countries, please contact 
your local government to investigate the possibility of recycling your product.

 

 

This product does not connect to an antenna.This product is not a receiver.This product is purpose for

 

video data transformation.This product has HDMI , but audio data does not output. 

HDMI,the  HDMI  Logo,and  High-Definition  Multimedia  Interface  are  either  trademarks  or  registered 

trademarks of HDMI Licensing, LLC.

 

 

WOWOW  Entertainment

  does  not  guarantee  the  operation  of  this  product  used  in  the  network 

configurations other than those specified in this manual.

 

 

The product and product specifications described in this document are subject to change without 

notice due to reliability, function, and improvements in design.   

This document, in whole or in part, may not be reprinted or copied without direct permission from 

WOWOW Entertainment

   

WOWOW Entertainment

 does not assume responsibility for any damage, direct or indirect, caused by 

the use of this product. 

This document does not authorize the use of patent or any other rights of 

WOWOW Entertainment

   

or any third party.   

Proper names mentioned in this document, such as the name of products, are registered trademarks 

of each manufacturer.   

Summary of Contents for IS-mini





















Reviews: