iQ4Bike base
Installation and connection
Using several iQ4Bike bases
C-2
2. Connect the USB cable (2) to the USB port of the PC and to iQ4Bike base (6).
3. Start WOW! Portal.
IQ4Bike base is automatically detected by the WOW! Portal.
4. Configure the IQ4BIKE diagnostic tool for wireless data transmission as described in the
tool manual.
2
Using several iQ4Bike bases
2.1
Requirements
WOW! Portal started on the PC
N O T E
If several iQ4Bike bases are being used, they must always be connected individ-
ually one after the other, and the relevant assignment from the IQ4BIKE
diagnostic unit must be waited for.
2.2
Performing the installation
1. To install the first iQ4Bike base, carry out steps 1-4 as described in section 1.2.
2. Connect the second USB cable to the second USB port of the PC and to second iQ4Bike
base.
